Insulation is one of the major aspects of any structure and plays a significant role in the building construction. It affects the extent to which the project is able to insulate, prevent fire or reduce noise – all of which are critical in the quest to reduce energy costs while increasing comfort. There are many types of insulation and they include the board type, slab type and the rolled type. At times, you may require one of the three types while at other times all the three may be required depending on the situation.

Where Is Insulation Needed The Most?

Insulation is most needed in the following areas of a building:

Attic: To prevent heat loss or gain through the roof.
Walls: To reduce heat transfer between inside and outside.
Roof/Ceiling: To regulate temperature and prevent heat loss.
Floors: Above unheated spaces to maintain even indoor temperatures.
Basement/Crawlspaces: To prevent moisture issues and maintain comfort.
Windows/Doors: To minimise heat transfer.
Exterior: Ideal for buildings situated in extreme climates.
Pipes/Ductwork: To prevent heat loss and maintain efficiency.
Between Floors: For sound insulation and thermal separation.

Insulation Benefits

Among the main benefits of insulation are lower heating costs and lessening of your carbon footprint. The Energy Saving Trust emphasises that good insulation reduces energy use by keeping dwellings cooler in summer and warmer in winter. By lowering greenhouse gas emissions, this helps to create a more sustainable environment in addition to lowering heating and cooling costs. High-quality insulation investments can improve comfort, save money over time, and help environmental preservation initiatives.

Here are the most apparent benefits of installing insulation:

Energy savings
Improved comfort
Environmental impact
Moisture control
Noise reduction
Long-term savings
Health and safety
Reduced carbon footprint
Regulatory compliance
Durability
Enhanced property value
Year-round comfort

100mm Rockwool RWA45 Acoustic Sound Insulation Slab (2.88m2/Pack)

Comprising complete insulation solutions for thermal, acoustic, and fire protection requirements, the Rockwool RWA45 100mm Acoustic Sound Insulation Slab Made from mineral wool with a density of 45kg/m³ and with a non-directional fibre structure that improves sound insulation, this high-performance slab is ideal for domestic, business, and recreational uses. It’s ideal for isolating floor from wall where better acoustic performance is required. Its A1 non-combustible certification resists fire spread and damage, so offering outstanding fire safety. Its 0.035 W/mK thermal conductivity keeps buildings efficient. Cut to 1200mm x 600mm, the slabs fit well between floor joists set 600mm apart and conventional stud partitions. Every pack has four slabs; Rockwool also comes in 25mm, 50mm, and 75mm thicknesses.

25mm EcoTherm Eco-Versal PIR Insulation Board 2400mm x 1200mm

With 25mm Eco-Versal PIR Insulation Boards, improve comfort and cut energy consumption. Made with a blowing agent guaranteeing low global warming potential (GWP) and zero ozone depletion potential (ODP), these stiff, fiber-free boards have a polyisocyanurate (PIR) core. Aluminium foil composite on both sides presents a lambda value of just 0.227 W/mK for outstanding thermal efficiency on every board. EcoTherm boards, which are flexible and light, fit for a variety of uses including floor, wall, ceiling, and pitched roof, hence they are perfect for both new build and renovations. These boards, which measure 2400mm by 1200mm, provide a good way to keep thermal performance in different building projects intact.

100mm Knauf DriTherm Cavity Wall Insulation Slab 37 (6.55m2/Pack)

Designed to offer outstanding thermal performance in external masonry cavity walls, the 100mm Knauf DriTherm 37 Cavity Wall Insulation Slabs These glass mineral wool slabs effectively insulate with a thermal conductivity of 0.037 W/mK, therefore improving energy efficiency and lowering heat loss. Reliable and flexible, suitable for structures up to 12 metres in any exposure zone and multi-story applications up to 25 metres tall. Their name’s “Dri” denotes a water-repellent ingredient that, by stopping moisture infiltration, maximises thermal performance. These slabs, produced utilising ECOSE technology, are gentle to the touch yet strong enough to remain in situ and show environmental sustainability. Their BVA certification and A1 Euroclass fire rating give non-combustible, full-fill insulation, therefore lowering the risk of fire spread. Every pack covers 6.55 metres squared.

100mm Knauf Loft Roll 44 Insulation Combi-Cut (13.89m2/Roll)

Designed for pitched roofs at ceiling level, the high-performance thermal insulation solution 100mm Knauf Loft Roll 44 Insulation Combi-Cut (13.89m²/Roll) offers Rated A1 Euroclass for outstanding fire safety, this roll has a thermal conductivity of 0.044 W/mK, therefore guaranteeing efficient thermal insulation. With partially cut rolls for timber joists at 400mm or 600mm centres and also full-width rolls to improve on-site efficiency, the Combi-Cut design offers simplicity of use. Odourless, rot-proof, non-hygroscopic, the insulation resists vermin and stops the growth of fungus, mildew, or germs. This guarantees dependability of performance and a better interior environment. Ideal for many roofing uses, each roll covers 13.89 m².

100mm Rockwool RW5 Acoustic Sound Insulation Slab (1.44m2/Pack)

The 100mm Rockwool RW5 Acoustic Sound Insulation Slab (1.44m²/Pack) will help to change your living area. These semi-rigid, resin-bonded slabs are meant to greatly lower sound transmission between floors, ceilings and interior walls, hence improving privacy and peace. Having a density of 100 kg/m³, the Rockwool RW5 shines in soundproofing and offers better noise reduction than other mineral wool products. Having passed thorough fire safety testing, its A1 Euroclass rating confirms it as non-combustible, therefore guaranteeing both safety and quality. Given that every pack covers 1.44m², it is a wise choice for good acoustic insulation.

About Materials Market

Every successful business starts with an idea and Materials Market is no exception. Samuel and Andrew the founders were working for a small roofing contractor where they were buyers struggling to secure building materials and transport them to the construction site at a given time and cost. This meant calling the supplier and the supplier alone to check if they have the product in stock and if they do, how much it will cost me to have it and how to place the order. It was so hard to find a supplier out there, but to find one that met all the requirements for every order was almost next to impossible. If only there was a way to target all of them at the same time. Samuel began to get a glimpse of an idea forming in his mind…

Samuel and Andrew in a small Japanese restaurant in Camden drew up plans for a website that would link a number of suppliers to offer low prices, fast delivery and good service to trade and DIY customers. This was because they understood that when the suppliers come up with a proposition, it would be much better than each of them coming up with their own proposition.

Skip ahead a few years of blood, sweat, and tears and Materials Market was the end product. Born in Andrew’s North London flat back bedroom with a whiteboard, a whippet, and a vision, in two years Materials Market has become one of the most popular online suppliers of building materials, catering to thousands of customers and driving sales for supply chain partners throughout the country.

As a fully-fledged team of sales staff, software developers and general enthusiasts of the cause, Materials Market aims at ensuring that the customer and supplier get the best out of the company.